NEMO SX - Measuring and supervision system Archivi

NEMO SX- MEASURING AND SUPERVISION SYSTEM

An intelligent system for energy management

NEMO SX is an autonomous and integrable system that thanks to the type of automatic connection, simplifies the assembly phases and does not require modifications in the existing panels. Its mechanical characteristics allow it to be used with a wide range of protection devices and in all distribution panels and cabinets prepared with DIN35 profiles. The supervision of the system is allowed by using any PC device, tablet or smartphone, through the software installed or the browser for internet browsing. The NEMO SX system allows:

Check the correct functioning of the installation
Directly control your system
Supervise the system remotely

SISTEMA DI MISURA E SUPERVISIONE NEMO SX

DOWNLOADS

CATALOGUE

TECHNICAL NOTES & MANUALS

FIND OUT MORE

Measurement

NEMO SX makes to measure electrical parameters and display the status of the switches and loads, the faults and the general conditions of the system locally and remotely.

Command and control

The system allows to control the control devices, locally or remotely, through manual or automatic commands

Supervision

NEMO SX monitors and controls all processes using IT tools to optimize energy consumption at any time and in any place:
- Check the status of the switches
- Remote control of circuits
- Scheduled maintenance
- Corrective actions on the system
- Management of alerts and alarms
- Historical analysis of consumption over time

A professional offer for everyone

The NEMO SX system was created to meet the needs of all professionals in the electrical field. The designers find the answer to their needs in terms of energy efficiency, the system integrators in the possibility of integrating the control system in a wide application field and the installers for the installation and the simple and rapid maintenance in the panels and cabinets of distribution.

Nemo SX - Caratteristiche - Gestione 4 fasi

4 phases for the management of the installation

Installare un sistema di Installing a Nemo SX Supervision and Measurement system is simple. Everything can be summarized in 4 simple steps

Phase 1)
Choice of functions: Measure of currents, voltages, powers, frequency, harmonic distortion, energies, cosφ ... or impulse concentrator to collect data from 3 pulse counters. Command: actuator for motorized controls

Connection

Phase 2)
The connection of the supervision functions is quick and easy thanks to the communicating guide or through the already pre-wired connecting cables

Nemo SX - Caratteristiche - Configurazione

Configuration

Phase 3)
There are 2 configuration modes:

Manual Acting directly on every single device, using a simple screwdriver. In this mode it is possible to:
1. Configure: by acting on the lateral micro-switches on the devices
2. Address: by turning the wheel on the devices.
3. Program: using the modular Mini configurator.

By PC In this case it is possible to:
1. Configure the devices
2. Address the various objects in the system
3. Load the configurations in the system
4. Access the most technical configurations (timing, intervention thresholds, define alarms, rename circuits ...)

Supervision

Phase 4)
There are different methods of supervision:

In local: Supervision is directly accessible in the electrical panel.

Remote: the installation is managed by PC, Smartphone, Web page, tablet .... The following solutions can be implemented:

- Single PC: With the license key (Energy Manager software) viewable on 1 PC only
- Multiple PCs: With the Web Server for viewing on 1 or more PCs, tablets, smartphones.

Software / Web Server Licenses

The Nemo SX system is sold with the possibility of being managed through WebServer or Energy Management Software. It is possible to choose between different solutions depending on the number of devices to be managed.

Nemo SX – Sistema di supervisione e misura

Nemo SX – A professional offer for everyone

DOWNLOADS
Brochure

PRODUCT RANGE

Nemo SX system

FIND OUT MORE