|
|
|
Beep |
June 2010 |
Power relay single-phase Beep is a new energy management relay for networks with single-phase loads up to 6kW, which avoids the tripping of the KWH meter and the relevant black-out when it exceeds the contract power. By exceeding a loadable power threshold, it activates an inner alarm buzzer, which allows the load manual tripping or it directly intervenes to trip the non-priority loads connected with the SPST output relay with voltage 250V/16A Download Technical Note More info
|
|
Conto D4-Pt MID |
June 2010 |
Energy meter Conto D4-Pt MID is the new three-phase 4 wire network energy meter MID certificate in accordance with the directive of the European Union 2004/22/EC annex MI-003. Input voltage direct 3x230(400)V, input current on CT /5A. Active energy count (cl.B EN50470-3), reactive energy count (cl.2 EN62053-21). Multimeasurement (A, V, Hz, P, Q, S, Pmd, Pmdmax, PF, hm). Output pulse repetition count active energy and RS485 communication (JBUS/MODBUS protocol). Download Technical Note More info
|
|
MIDAs Evo |
April 2010 |
Monitoring network management software It allows centralized acquisition, management and processing of measurements coming from multifunction devices series Nemo or kWh meters series Conto equipped with RS485 serial output Modbus RTU protocol. It can manage local or remote monitoring networks. Download Technical Note
|
|
Delta D4-I |
March 2010 |
Earth leakage relay Delta D4-I is the new 4 module housing earth leakage relay for use in public lighting systems, traffic lights and unattended equipments. It can guarantee the differential protection and at the same time to avoid the permanent cutting out of the systems in the cases of transitory breakdowns (example overstrains induced by a lightning). Although this relay is for sinusoidal (AC type) or pulsating residual current with DC component (A type) waveforms, in compliance with IEC60947-2 VIII edition 2007 (annex B and M). Download Technical Note
|
|
Delta 96-F |
March 2010 |
Earth leakage relay IME's flush mounting 96x96mm earth leakage relay range gets enriched by a new model, the Delta 96-F, just suitable for heavy industrial applications with distorted current waveforms (inverters, variable speed drivers, rectifiers, frequency regulators). It mustn't be used to protect people (automatic cut-out). The minimun set threshold is 50mA. Available also in 72x72mm flush mounting housing version (Delta 72-F). Download Technical Note
|
|
Nemo MD |
January 2010 |
Module for network monitor Purchasing code IF96014 is a BACnet communication module for Nemo 96HD and Nemo 96 HD+ (starting from V 2.08). BACnet is a communication bus focused on building automation which has been developed in USA by ASHRAE ( American Society of Heating, Refrigeration, and Air-Conditioning Engineers). BACnet allow the standardization of the communication among devices of different suppliers. Download Technical Note
|
|
Nemo MD |
January 2010 |
Module for network monitor Purchasing code IF96013 is a M-Bus communication module for Nemo 96HD and Nemo 96 HD+ (starting from V 2.08). M-Bus is a communication bus which complies with European standard EN1434-3. Very popular in building automation for water, gas and electricity consumption management. Download Technical Note
|
|
Nemo MD |
January 2010 |
Module for network monitor Purchasing code IF96012 is a storage module for Nemo 96HD and Nemo 96 HD+ (starting from V 2.08). Storage of the instantaneous parameters: A, A neutral, V, Hz, P, Q, S, P phase, Q phase, THD A, THD, V, Alarms. Storage of P/Q/Smd and P/Q/Smd max. Storage, every 15 minutes, of positive and negative kWh and kVarh. Internal programmable clock/calendar. Access to the data via RS 485 Download Technical Note
|
|
Conto 72-Pt |
December 2009 |
Energy meter Conto 72-Pt is an energy meter in 72x72mm flush mounting housing, for low/medium voltage three-phase or single phase networks. CT / 1A and / 5A current (programmable ratio), direct connection voltage up to 440V or on VT (programmable ratio). Total and partial active energy count class 1, total and partial reactive energy count class 2. Pulse output or RS485 communication. Available also in 96x96mm flush mounting housing version (Conto 96-Pt). Download Technical Note
|
|
Conto D4-Pt |
December 2009 |
Energy meter Conto D4-Pt is now available also with built in M-Bus communication module. M-Bus is a communication bus which complies with European standard EN1434-3. Very popular in building automation for water, gas and electricity consumption management. Download Technical Note
|
|